| Name | Manual Transmission System |
|---|---|
| Recommended Handle Lengths | 160mm To 220mm (6-¼" - 8-¼" Approx.) |
| Normal Working Load @ Knob | 3kg (6.6 Lb.) To 5kg (11lb.) |
| Accidental Overload @ Knob | 100kg (220lb.) |
| Operating Temperatures | -40°C To 120°C (-40°F To 248°F) |
| Name | Car Transmission System |
|---|---|
| Model Number | 925 Series |
| Recommended Handle Lengths | 305mm To 380mm (12" - 15" Approx. |
| Normal Working Load @ Knob | 3.0kg (6.6lb.) |
| Accidental Overload @ Knob | 100kg (220lb.) |
| Name | Marine Boat Throttle Shift Control Cable Has Red Jacket With Stainless Steel Fittings |
|---|---|
| Material | Stainless Steel, Rubber |
| Feature | High Temperature Resistance, Low Loss , Long Service Life |
| Length | Can Be Customized |
| Certificate | IATF16949 |
| Name | Marine Push Pull Cable Marine Engine Throttle Control Cable |
|---|---|
| Material | Stainless Steel, Rubber |
| Feature | High Temperature Resistance, Low Loss , Long Service Life |
| Length | Can Be Customized |
| Certificate | IATF16949 |
| Name | Horizontal Gear Shifter HGS Systems 923 Series |
|---|---|
| Operating Temperature | -40°C To 120°C (-40°F To 248°F) |
| Material | Pressure Die-Cast Aluminum |
| Feature | Easy Installation, Adjustment Free,Maintenance-free Life |
| Applications | Center Console Mounted Shifter, Bus, Coach & Truck, Agricultural Vehicles |
| Series | Rotary Control Cable |
|---|---|
| Applications | Heater Valve Control / Vent Control |
| Travel | 1.50” Maximum |
| Material | Plated Carbon Steel Corrosion-Proof Control Heads |
| Efficiency | Efficiency: 4 Inch / Lb Maximum To Push-pull 5lb |
| Name | Non Lock Industrial Push-Pull Control Head |
|---|---|
| Applications | Engine Shut Down |
| Load | Up To 50lb |
| Travel | 1-3.00" |
| Material | Plated Carbon Steel Corrosion - Proof Control Heads |
| Name | Control Cable Assembly |
|---|---|
| Applications | Engine Shut Down |
| Load | 100lb Maximum |
| Travel | 3.00" Maximum |
| Material | Plated Carbon Steel Corrosion-Proof Control Heads |
| Name | Twist Lock Push-Pull Control Head |
|---|---|
| Applications | Engine Shut Down, Engine Choke, Latch Operation, Valve Operation |
| Load | 100lb Maximum |
| Travel | 3.00" Maximum |
| Material | Plated Carbon Steel Corrosion-Proof Control Heads |
| Transmission Direction | Push-pull Bidirectional |
|---|---|
| Travel | 3" |
| Minimum Bending Radius | 4" |
| Sheath Material | LDPE Covered (Blue) Conduit |
| Inner Member | Inner Member |